Reverse Osmosis Indonesia – RO Systems – WRO-4H Series

BWRO  Sistem Reverse Osmosis Indonesia Seri WATTECH ‘WRO-4H’ dirancang untuk aplikasi komersial dan industri yang lebih besar yang membutuhkan air dengan kemurnian tinggi (penolakan garam 98-99%). Kapasitas output nominal 10.800-28.800 GPD. Rumah membran yang disusun secara horizontal untuk keluaran produk maksimum dengan persyaratan penggunaan ruang lantai minimal. Tersedia paket pemasangan skid yang sangat mengurangi waktu dan biaya pemasangan.

Dirancang untuk aplikasi komersial dan industri yang lebih besar yang membutuhkan air dengan kemurnian tinggi (penolakan garam 98-99%). Kapasitas output nominal 10.800-28.800 GPD. Rumah membran yang disusun secara horizontal untuk keluaran produk maksimal dengan luas lantai terkecil minimal

Features/Benefits

• High rejection, 4″ x 40″ thin-film composite (TFC) membrane elements in a spiral-wound configuration.
• FRP membrane housings with PVC end-cap material (300 psig rating).
• Stainless steel multi-stage feed pump with TEFC motor (230/460V, 3-Phase).
• Epoxy –coated carbon steel skid/frame assembly.
• Polypropylene pre-filter housing with 5.0-micron cartridge.
• NEMA-4X system controller complete with operator lights and switches for simple operation. Includes pre-wired motor starter, low inlet pressure switch with alarm, and pre-treatment interlock.
• Compact product water conductivity monitor with digital display.
• Panel-mounted product, reject, and recycle visual flow rota-meters.
• Panel-mounted stainless steel system pressure gauges and sampling valves.
• PVC low pressure piping/valves and brass/stainless steel high pressure tubing and valves.
• Automatic system inlet feed valve.
• Automatic membrane flush cycle (after system shutdown).

Optional Equipment

• Skid-Mount Packages – RO machines are available with the necessary pre-treatment and re-pressurization equipment mounted to a structural carbon steel skid and pre-piped/pre-wired to the fullest extent. Greatly reduces installation time and costs. Not available for 18,000-28,800 GPD models.
• Clean-in-Place Packages – For periodic cleaning of the membrane elements to remove mineral scale and biological fouling. Includes a skid mounted and pre-wired transfer pump, batch solution tank, inlet filter housing, isolation valves, and quick disconnect cleaning ports. Recommended for 18,000-28,800 GPD models to maximize membrane life and significantly reduce operating costs.
• Reverse Osmosis System The Best In Indonesia
•